top of page

GM TBI Services Done to Your TBI Core
NO REFUNDS  90 Day Warranty from date of delivery
Please understand build times are 3 weeks

  1. Services are for the Rochester 220 style "2 barrel" units only 1987-1995 SBC and BBC. 

  2. The services listed below are performed on your core.

  3. Check out our Products page for our complete units and other items if you choose to keep your core.

  4. Shipping is an additional cost ~$16.00 USPS Medium flat rate box to U.S, only. International is at an extra cost.

  5. Please see warranty for information regarding the coverage and overhauling of your core.

 

TBI Bushing Services

          Oil Impregnated Bronze Bushings (bushing only)

          Rochester 220 Style  $85.00

 

          Double Sealed Needle Bearings (Super Charger Applications-bushings only)

          Rochester 220 Style  $125.00

​

Complete TBI Overhaul Services

         1.  Basic overhaul of your complete unit with NO performance mods (no boring)

          Degrease, glass-bead blast, bush shaft with oil impregnated bronze bushings, shave air horns and thin shaft (SBC only), clean and test sensors and reset TPS voltage to .550V-.600V, new IAC gasket, new spring and diaphragm, make reg cover adjustable, basic cleaning of injectors and installing new filters and O-rings, raise pod to 1/4" (SBC only). Includes base flange gasket, air cleaner gasket and fuel line o-rings. Stock bore size remains the same

           Rochester 220 Style  $295.00

         

         2.  Ultimate TBI overhaul of your complete unit with basic performance mods (no boring)

          Same as basic, but we install New IAC and new TPS.  Stock bore size remains the same.

          Rochester 220 Style  $350.00

          

TBI Boring Services

         3. Expanded boring service of your TBI (base unit only)

           With this service we degrease, glass-bead blast, bore the unit to either 46mm (SBC) or 54mm (BBC), install custom fit blades, bush the shaft with oil impregnated bronze bushings and thin the shaft. We also shave air horns down on SBC units. Includes a custom cut base flange gasket.  Does not include any  other gaskets, O-rings or hardware. 3 week build time once we receive your unit.

           Rochester 220 Style  $250.00

​

Complete TBI Overhaul and Boring Service

           4.  Ultimate TBI Overhaul of your unit which includes boring

            This is the most comprehensive rebuild of your GM Rochester 220 TBI unit. Here we will degrease, glass-bead blast, bush shaft with oil impregnated bronze bushings, new IAC, new TPS, set TPS voltage to .550V, IAC gasket, new spring and diaphragm, make regulator cover adjustable, complete servicing/testing of injectors and installing new filters and o-rings, raise injector pod to 1/4" (SBC), thin shaft, shave air horns (SBC). Includes custom cut base flange gasket, air cleaner gasket and fuel line o-rings. We will also bore your unit to 46mm (SBC) or 54mm (BBC) and install custom fit blades.  3 weeks build time once we receive your unit.

            Rochester 220 Style  $450.00

​

Intake Boring Service / Cerakote

           1.  Basic intake boring service

                With this service all we do is bore the intake to 50mm for SBC and 54mm for BBC    $85.00

           2.  Expanded intake boring services

                Here we hot tank and flush, glass-bead blast and bore your intake.     $150.00

           3.  Cerakote Coating

                We can coat your intake with Cerakote.  Flat black, semi-gloss black, Glacier Silver and Sig Dark Gray.     This is expanded boring                    service and Cerakote.  So, we hot-tank, flush, bead-blast, bore and Cerakote.     $275.00

​

Add-On / Upgrades

​

  1. Upgrade to double sealed needle bearings. This is ONLY needed when using a super charger.

               Rochester 220 Style  $85.00 when purchased with a complete #4 overhaul.  Normally, this service is $125.00

 

  2. Upgrade with a fuel pressure regulator block-off plate kit. 

               Rochester 220 Style $14.99 when purchased with a complete #4 Overhaul

​

  3.  Carb adapter plate

               (Square bore style) is normally $109.99, but when purchased with the $450.00 #4 overhaul it is $85.

​

​

​

bottom of page